Indonesian Political, Business & Finance News

The Sinking of Virgo Transport 8: Between Japanese Ship Design and Indonesian Waters

| | Source: Republika Translated from Indonesian | Infrastructure
The Sinking of Virgo Transport 8: Between Japanese Ship Design and Indonesian Waters
Image: Republika

REPUBLIKA.CO.ID, SURABAYA – Professor Ir I Ketut Aria Pria Utama, a hydrodynamics expert at the Sepuluh Nopember Institute of Technology (ITS) Surabaya, has highlighted the seakeeping performance aspect of the KM Virgo Transport 8 incident, which capsized in the Masalembu Islands, Sumenep, East Java. The professor at the ITS Faculty of Marine Technology’s Department of Naval Architecture said the suitability of a ship’s design with the characteristics of local waters needs attention, particularly for vessels operating in Indonesia.

“What needs to be scrutinised is whether that Japanese-made ship design was suitable and recommended for sailing in Indonesian seas with high waves,” said Professor Ketut in Surabaya, East Java, on Tuesday (15/9/2026).

According to Ikap, as Professor Ketut is known, the seakeeping aspect — a vessel’s ability to face wave conditions — is often overlooked, which can trigger problems with ship stability and motion comfort during operations. KM Virgo Transport 8, which capsicked in the waters of the Java Sea near the Masalembu Islands on Sunday (13/9/2026), is known to be an imported vessel from Japan, approximately 30 years old.

However, Ikap said the ship’s age should not be the main issue as long as maintenance is carried out properly. He explained that the characteristics of Japanese waters differ from those of Indonesia.

The distance between islands in Japan is relatively short, whereas Indonesia has open waters with the potential for large waves.

“This extreme sailing route characteristic demands a different hull design standard,” he said.

According to Ikap, roll-on/roll-off (roro) ferries from four-season countries generally have fully enclosed hulls. KM Virgo Transport 8 is also a roro vessel.

Meanwhile, ships operating in Indonesia often have openings on the sides to save energy and reduce the tax burden on enclosed spaces, which pose risks to ship stability. Ketut also raised the possibility of large volumes of water entering the ship’s body due to bad weather, high waves, or a ramp door that is not closed tightly or made watertight.

Water entering the ship’s deck without an adequate pumping system can create a free surface effect, or sloshing effect, causing the vessel to sway unstably.

“This risk is further exacerbated if the vehicles loaded on board are not properly secured, causing them to shift and drastically change the ship’s centre of mass,” said Ikap.

Beyond technical factors, he believes passenger safety also needs attention through education and safety procedures before the ship departs.

“This is crucial to ensure passengers understand independent evacuation steps to anticipate unexpected emergencies in the middle of the sea,” said Professor Ketut.

More from 15 September 2026 →

Cite this article
Source: jawawa.id (https://jawawa.id/newsitem/the-sinking-of-virgo-transport-8-between-japanese-ship-design-and-indonesian-waters-1789484042)
Originally published by Republika (https://news.republika.co.id/berita/tler1d409/tenggelamnya-virgo-transport-8-antara-desain-kapal-buatan-jepang-dan-karakteristik-perairan-ri), translated from Indonesian
Print