Specifications of SMK Muhammadiyah 3 Yogyakarta Students' Electric Drag Motorcycle
YOGYAKARTA, KOMPAS.com - Students from the Mechanical Engineering department at SMK Muhammadiyah 3 Yogyakarta have garnered attention with their custom-built electric drag motorcycle, Mugatech, capable of reaching speeds up to 134.5 kilometres per hour (km/h).
The electric motorcycle was developed as a student practical project and serves as a platform for advancing technical skills and electric vehicle innovation.
Hindro Harimawan, Head of the Mechanical Engineering Department at SMK Muhammadiyah 3 Yogyakarta, stated the project aims to create a vehicle without petrol (BBM) while maintaining high performance.
The Mugatech electric drag motorcycle uses a 20S lithium-ion (Li-Ion) battery with a capacity of 72 volts (V), 30 ampere-hours (Ah), equivalent to 2,160 watts.
The battery weighs approximately 10-15 kilograms (kg) and takes four to five hours to charge.
The propulsion system features a 4,000-watt Mid Drive BLDC motor with 72 volts and a rotational speed of 3,000-5,000 rpm.
For power control, Mugatech is equipped with a 72-volt controller handling 150-200 amperes (A).
Initial tests showed the vehicle has a range of 20-40 kilometres (km), depending on usage conditions and battery capacity.
Theoretical performance is estimated at 90-120 km/h, influenced by gear ratio and battery condition. However, during actual track testing, the motorcycle achieved significantly higher speeds.
Previous testing was conducted at Pantai Depok’s runway, where the motorcycle recorded a peak speed of 132-134.4 km/h over a 201-metre distance.
“This is still under development as we are not satisfied with the current results. It could have been optimised further. In the future, it could reach 145 km/h. The current recorded speed is around 134 km/h,” Hindro said.
Future development will focus on adjusting the gear ratio and increasing battery capacity, though the battery is one of the most expensive components.
Hindro also noted that the Mugatech electric drag motorcycle was developed across multiple student cohorts over approximately six months using trial and error, with all processes divided among sections to ensure full student involvement.
Source: jawawa.id (https://jawawa.id/newsitem/specifications-of-smk-muhammadiyah-3-yogyakarta-students-electric-drag-motorcycle-1780030664)
Originally published by Kompas (https://otomotif.kompas.com/read/2026/05/29/111200215/spesifikasi-motor-drag-listrik-rakitan-siswa-smk-muhammadiyah-3-yogyakarta?utm_source=ABC&utm_medium=rss), translated from Indonesian