Safety of Maextro V800 in the spotlight after reports of brake problems
Jakarta (ANTARA) - The safety of the Maextro V800, a luxury multi-purpose vehicle developed through a collaboration between Huawei and JAC Motors, has come under scrutiny following reports of brake problems during emergency braking tests.
According to CarNewsChina, a video report released on Thursday by Dongchedi, one of China’s leading automotive media outlets, showed the vehicle’s brake pedal failing during emergency braking tests.
In its video report, Dongchedi said that three different Maextro V800 vehicles, all with low mileage, suffered brake-pedal bracket damage during tests in which they were brought to a stop from 100 kilometres per hour on a closed track.
Initial analysis indicated a potential structural weakness in the pedal assembly. The centre of the pedal is about 130 millimetres from the pivot axis, while the area around the pivot has only a single layer of vertical support. Similar vehicle models from the same supplier use two to three reinforcing layers.
Inspection of the broken components found weld marks in high-load areas, thin material and a lack of reinforcing ribs.
Testing showed that these limitations increased the braking distance from about 38 metres to approximately 140 metres.
The Maextro V800’s user manual explicitly states that emergency braking in gear ‘P’ is intended to decelerate the vehicle and cannot fully replace the conventional braking system.
Maextro and JAC Motors have not issued an official statement responding to the reports of brake-pedal problems with the Maextro V800.
Source: jawawa.id (https://jawawa.id/newsitem/safety-of-maextro-v800-in-the-spotlight-after-reports-of-brake-problems-1791460488)
Originally published by Antara (Indonesian) (https://otomotif.antaranews.com/berita/5777213/aspek-keselamatan-maextro-v800-disorot-menyusul-laporan-masalah-rem), translated from Indonesian