PT Timah Seeks to Accelerate Indonesia’s Manufacturing Industry
JAKARTA – PT Timah Tbk (TINS) will focus on developing its core business as a mining company and will not transform into a tin-based materials developer. Looking ahead, it will seek to accelerate national industrialisation to strengthen the downstream tin industry.
“We will remain a mining company because that is PT Timah’s business strength. Tin-based materials can be handled by other companies with the relevant expertise. However, PT Timah may acquire shares in or invest in such companies, giving us a broader perspective on the downstream industry. This will help determine how much tin needs to be produced, how large our reserves should be and, most importantly, ensure there are offtakers for our tin production,” PT Timah Production and Commercial Director Ilhamsyah Mahendra told the media in Jakarta on Wednesday evening (11 November).
He said accelerating the manufacturing industry was important so PT Timah’s output would not depend on export markets. Domestic manufacturers could absorb its production, allowing businesses in Indonesia to capture more added value.
“Some time ago, the government planned to establish a Special Economic Zone in Bangka Belitung to bring industry closer to the region’s resources. We hope this plan will be realised soon,” Ilhamsyah said.
Tin processing and downstream development in Indonesia have bright prospects. At the recent Indonesia Investment Forum 2026 in London, the government secured an investment commitment of about Rp4.16 trillion (US$252.1 million) from Titanium Capital. Ilhamsyah said successful downstream development required more than expanding processing capacity: growth in manufacturing, including laptop, mobile phone, semiconductor and printed circuit board (PCB) production, also needed to accelerate.
PT Timah has developed downstream products since 2008 through its subsidiary PT Timah Industri in Cilegon, Banten. The company produces tin solder and tin-based chemicals. Its current capacity is about 800 tonnes of tin chemicals and 100–150 tonnes of tin solder.
Tin solder production capacity could potentially be doubled. However, domestic demand for tin metal currently stands at only about 2,500–3,000 tonnes a year, relatively small compared with national production capacity and potential. Without growth in domestic end-user industries, expanded downstream capacity will remain dependent on export markets, Ilhamsyah said.
Despite these challenges, PT Timah recorded growth of more than 30 per cent in tin ore and refined tin production through September 2026. The performance was supported by a rise in the global tin price, which averaged US$50,000 per tonne, around 42 per cent higher than a year earlier. Sales of refined tin also grew by about 30 per cent, creating an opportunity for the company to strengthen its position in global markets.
Company data show that the average price of refined tin was about US$35,000 per tonne last year, compared with roughly US$50,000 per tonne through September 2026. The positive outlook is expected to continue into 2027.
Ilhamsyah said global tin consumption in 2024–2025 was estimated at 360,000–380,000 tonnes a year, driven by modern technology industries such as artificial intelligence, data centres, semiconductors and PCBs. Global production, meanwhile, was estimated at 340,000–350,000 tonnes, pointing to a gap between demand and supply. “Demand is growing faster than production, so output still cannot meet 100 per cent of demand,” he said.
Extending mine life
PT Timah is stepping up exploration to increase its tin mineral resources and reserves. The aim is to extend the mine life from about 10 years to at least 25 years, in line with global mining standards.
The company currently has nearly 800,000 tonnes of tin resources, but only about 300,000 tonnes in mineable reserves. Assuming annual production of 30,000 tonnes, those reserves would support production for only around 10 years.
PT Timah Corporate Strategy and Business Development Director Harry Budi Sidharta said the company was also looking for opportunities to secure new mining business permit (IUP) areas. Existing permit areas are increasingly limited, and some are close to settlements, forest areas and zones where mining is restricted, including fishing grounds. “Identifying new areas is one way to maintain the sustainability of the company’s raw-material supply and production,” he said.
Harry said PT Timah had prepared investments to strengthen production and exploration, including plans to procure two exploration vessels. Investment would be prioritised for production equipment, particularly vessels supporting exploration, he said. “We are using this momentum to invest, with a greater focus on production equipment, especially our mining exploration vessels.”
The company plans to procure two vessels, but the investment will depend on its reserves to ensure expansion does not go too far. Delivery could take place as early as late 2028, he said.
Careful management of expansion is important because most of PT Timah’s refined tin is sold overseas. About 97 per cent of its smelted or refined output is exported as tin ingots, while 3 per cent is sold domestically. “We also face challenges in the domestic market, including competition from imported products that receive various incentives, such as zero import duties, making it difficult for domestic products to compete. PT Timah is therefore advocating for incentive policies that provide a more level playing field for domestic industry,” Harry said.
PT Timah is also pursuing business development in rare earth elements (REE). Harry said it was working with the Bandung Institute of Technology (ITB) on REE development. One milestone has been the production of mixed rare earths from monazite processing.
The product will then be processed to extract individual rare-earth elements, including neodymium, praseodymium, cerium and yttrium. “Those will become individual rare earths. Hopefully, we can launch the mixed rare-earth product next year,” he said. The company is using stocks of monazite and slag held in its warehouses for this work.
Streamlining subsidiaries
PT Timah is targeting the streamlining of three subsidiaries in 2026 as part of efforts to reorganise its business structure and improve efficiency. They are Timah International Investment Pte. Ltd. (Tinves) in Singapore, its Hong Kong subsidiary Great Force Trading Limited (GFT), and PT Timah Agro Manunggal, which operates in reclamation and agribusiness.
The company is processing the liquidation of Tinves and GFT. It also aims to complete the restructuring of PT Timah Agro Manunggal this year.
“Hopefully, all these restructuring plans can proceed as planned. Through this strategy, PT Timah is seeking to build an integrated company, from mining through to downstream product development, while strengthening the sustainability of the national tin business,” Harry said.
Source: jawawa.id (https://jawawa.id/newsitem/pt-timah-seeks-to-accelerate-indonesias-manufacturing-industry-1794513060)
Originally published by dunia-energi.com (https://www.dunia-energi.com/pt-timah-dorong-percepatan-industri-manufaktur-nasional/), translated from Indonesian